enable snmp trap l3vpn

enable snmp trap l3vpn {vr_name}

Description

This command enables Layer 3 VPN MIB notification traps for the child VPN VRFs of the specified VR.

Syntax Description

vr_name Specifies the name of the parent VR where this RFC 4382 scalar is applied. If vr_name is not provided, then this command is applied to the VR in the current context.

Default

Disabled.

Usage Guidelines

This command enables generation of the following Layer 3 VPN SNMP traps:
  • mplsL3VpnVrfUp—Sent when the first IP VLAN becomes active and the administrative state is enabled.

  • mplsL3VpnVrfDown—Sent when the last active IP VLAN becomes inactive, or the administrative state is disabled.

Example

The following example enables SNMP traps for Layer 3 VPNs on the default VR:

enable snmp traps l3vpn vr vr-default

History

This command was first available in ExtremeXOS 15.3.

Platform Availability

This command is available on BlackDiamond8900 xl- and xm-series modules and Summit X460, X480, X670, and X770 switches.