Displays the status of the ExtremeXOS processes.
| name | Specifies the name of the process. |
| detail | Specifies more detailed process information. |
| description | Describes the name of all of the processes or the specified process running on the switch. |
| slotid | Specifies the slot number of
the MSM/MM module:A specifies the MSM installed in slot A.B
specifies the MSM installed in slot B. Note: This parameter is
available only on modular switches. In a Summit stack, slotid
specifies the slot number of a node in a stack topology.
|
N/A.
The ExtremeXOS process manager monitors all of the XOS processes. The process manager also ensures that only version-compatible processes are started.
Using this command without the optional keywords displays summary process information. When you specify the slot keyword, summary information is displayed for that particular slot only.
The show process and show process slot slotid commands display the following information in a tabular format:
When you specify the detail keyword, more specific and detailed process information is displayed.
This status information may be useful for your technical support representative if you have a network problem.
Depending on the software version running on your switch or your switch model, additional or different process information might be displayed.
You may find it useful to capture the process information under normal operating conditions to establish a baseline. By having a baseline, if you experience a problem, you and your technical support representative can more easily identify the problem.
The following is sample output from a modular switch using the show process command:
# show process Card Process Name Version Restart State Start Time ------------------------------------------------------------------------------ MSM-A aaa 3.0.0.2 0 Ready Sat Dec 6 10:54:24 2003 MSM-A acl 3.0.0.2 0 Ready Sat Dec 6 10:54:25 2003 MSM-A bgp 3.0.0.2 0 Ready Sat Dec 6 10:54:24 2003 MSM-A cfgmgr 3.0.0.20 0 Ready Sat Dec 6 10:54:23 2003 MSM-A cli 3.0.0.21 0 Ready Sat Dec 6 10:54:23 2003 MSM-A devmgr 3.0.0.2 0 Ready Sat Dec 6 10:54:23 2003 MSM-A dirser 3.0.0.2 0 Ready Sat Dec 6 10:54:21 2003 MSM-A edp 3.0.0.2 0 Ready Sat Dec 6 10:54:24 2003 MSM-A ems 3.0.0.2 0 Ready Sat Dec 6 10:54:23 2003 MSM-A epm 3.0.0.2 0 Ready Sat Dec 6 10:54:21 2003 MSM-A exacl 3.0.0.2 0 Ready Sat Dec 6 10:54:23 2003 MSM-A exosmc 3.0.0.2 0 Ready Sat Dec 6 10:54:23 2003 MSM-A exosq 3.0.0.2 0 Ready Sat Dec 6 10:54:22 2003 MSM-A exsnoop 3.0.0.2 0 Ready Sat Dec 6 10:54:23 2003 MSM-A exvlan 3.0.0.2 0 Ready Sat Dec 6 10:54:22 2003 MSM-A fdb 3.0.0.2 0 Ready Sat Dec 6 10:54:24 2003 foo_userd User 0 Ready Sat Dec 6 10:54:25 2003 foo_user1 User 0 Stopped Sat Dec 6 10:54:26 2003 foo_user2 User 0 Stopped Sat Dec 6 10:54:27 2003 foo_user3 User 0 Ready Sat Dec 6 10:54:28 2003 ....
The following is sample output from a Summit switch:
# show process Process Name Version Restart State Start Time ------------------------------------------------------------------------- aaa 3.0.0.2 0 Ready Thu Sep 1 17:00:52 2005 acl 3.0.0.2 0 Ready Thu Sep 1 17:00:54 2005 bgp Not Started 0 No license Not Started cfgmgr 3.0.0.21 0 Ready Thu Sep 1 17:00:52 2005 cli 3.0.0.22 0 Ready Thu Sep 1 17:00:52 2005 devmgr 3.0.0.2 0 Ready Thu Sep 1 17:00:52 2005 dirser 3.0.0.2 0 Ready Thu Sep 1 17:00:51 2005 dosprotect 3.0.0.1 0 Ready Thu Sep 1 17:00:56 2005 eaps 3.0.0.8 0 Ready Thu Sep 1 17:00:53 2005 edp 3.0.0.2 0 Ready Thu Sep 1 17:00:53 2005 elrp 3.0.0.1 0 Ready Thu Sep 1 17:00:53 2005 ems 3.0.0.2 0 Ready Thu Sep 1 17:00:52 2005 epm 3.0.0.4 0 Ready Thu Sep 1 17:00:49 2005 esrp 3.0.0.4 0 Ready Thu Sep 1 17:00:53 2005 etmon 1.0.0.1 0 Ready Thu Sep 1 17:00:55 2005 exacl 3.0.0.2 0 Ready Thu Sep 1 17:00:50 2005 exdos 3.0.0.2 0 Ready Thu Sep 1 17:00:50 2005 exfib 1.0.0.2 0 Ready Thu Sep 1 17:00:51 2005 exosmc 3.0.0.2 0 Ready Thu Sep 1 17:00:50 2005 exosnvram 3.0.0.3 0 Ready Thu Sep 1 17:00:50 2005 exosq 3.0.0.2 0 Ready Thu Sep 1 17:00:50 2005 exsflow 1.0.0.2 0 Ready Thu Sep 1 17:00:51 2005 exsnoop 3.0.0.2 0 Ready Thu Sep 1 17:00:50 2005 exvlan 3.0.0.2 0 Ready Thu Sep 1 17:00:50 2005 fdb 4.0.0.2 0 Ready Thu Sep 1 17:00:52 2005 hal 3.0.0.2 0 Ready Thu Sep 1 17:00:52 2005 lacp 3.0.0.1 0 Ready Thu Sep 1 17:00:53 2005 lldp 1.2.0.0 0 Ready Thu Sep 1 17:00:53 2005 mcmgr 4.0.0.2 0 Ready Thu Sep 1 17:00:54 2005 msgsrv 3.0.0.2 0 Ready Thu Sep 1 17:00:52 2005 netLogin 1.0.0.0 0 Ready Thu Sep 1 17:00:55 2005 netTools 3.0.0.2 0 Ready Thu Sep 1 17:00:55 2005 nettx 3.0.0.2 0 Ready Thu Sep 1 17:00:50 2005 nodemgr 3.0.0.2 0 Ready Thu Sep 1 17:00:52 2005 ospf 3.0.0.2 0 Ready Thu Sep 1 17:00:54 2005 ospfv3 Not Started 0 No license Not Started pim 3.0.0.2 0 Ready Thu Sep 1 17:00:54 2005 poe 3.0.0.2 0 Ready Thu Sep 1 17:00:56 2005 polMgr 3.0.0.2 0 Ready Thu Sep 1 17:00:54 2005 rip 3.0.0.2 0 Ready Thu Sep 1 17:00:54 2005 ripng 3.0.0.1 0 Ready Thu Sep 1 17:00:54 2005 rtmgr 4.0.0.2 0 Ready Thu Sep 1 17:00:53 2005 snmpMaster 3.0.0.2 0 Ready Thu Sep 1 17:00:52 2005 snmpSubagent 3.0.0.2 0 Ready Thu Sep 1 17:00:52 2005 stp 3.0.3.1 0 Ready Thu Sep 1 17:00:53 2005 telnetd 3.0.0.2 0 Ready Thu Sep 1 17:00:55 2005 tftpd 3.0.0.2 0 Ready Thu Sep 1 17:00:55 2005 thttpd 3.0.0.1 0 Ready Thu Sep 1 17:00:55 2005 vlan 3.1.0.2 0 Ready Thu Sep 1 17:00:52 2005 vrrp 3.0.0.5 0 Ready Thu Sep 1 17:00:55 2005 xmld 1.0.0.0 0 Ready Thu Sep 1 17:00:56 2005 foo_userd User 0 Ready Thu Sep 1 17:00:58 2005 foo_user1 User 0 Stopped Thu Sep 1 17:00:58 2005 foo_user2 User 0 Stopped Thu Sep 1 17:00:59 2005 foo_user3 User 0 Ready Thu Sep 1 17:00:59 2005 ....
The following example specifies the process aaa along with the detail keyword:
show process aaa detail
The following is sample output from this command:
# show process aaa detail Name PID Path Type Link Date Build By Peer -------------------------------------------------------------------------------- aaa 284 ./aaa App Thu Dec 4 13:23:07 PST 2003 release-manager 2 3 Virtual Router(s): -------------------------------------------------------------------------------- Configuration: Start Priority SchedPolicy Stack TTY CoreSize Heartbeat StartSeq -------------------------------------------------------------------------------- 1 0 0 0 0 0 1 1 Memory Usage Configuration: Memory(KB) Zones: Green Yellow Orange Red -------------------------------------------------------------------------------- 0 0 0 0 0 Recovery policies -------------------------------------------------------------------------------- failover-reboot -------------------------------------------------------------------------------- Statistics: ConnetionLost Timeout Start Restart Kill Register Signal Hello Hello Ack -------------------------------------------------------------------------------- 0 0 0 0 0 1 0 0 173199 Memory Zone Green Yellow Orange Red -------------------------------------------------------------------------------- Green 0 0 0 0 -------------------------------------------------------------------------------- Commands: Start Stop Resume Shutdown Kill -------------------------------------------------------------------------------- 0 0 0 0 0 -------------------------------------------------------------------------------- Resource Usage: UserTime SysTime PageReclaim PageFault Up Since Up Date Up Time -------------------------------------------------------------------------------- 2.160000 0.560000 546 966 Sat Dec 6 10:54:24 2003 00/00/04 00:14:02 -------------------------------------------------------------------------------- Thread Name Pid Tid Delay Timeout Count -------------------------------------------------------------------------------- tacThread 0 2051 10 0 radiusThread 0 1026 10 1 main 0 1024 2 1 --------------------------------------------------------------------------------
The following example describes the name of all of the processes running on the switch:
show process description
The following is sample output from this command:
# show process description Process Name Description ---------------------------------------------------------------------- aaa Authentication, Authorization, and Accounting Server acl Access Control List Manager bfd IETF Bidirectional Forwarding Detection bgp Border Gateway Protocol brm Bandwidth Resource Manager cfgmgr Configuration Manager cli Cli Manager devmgr Device Manager dirser Directory Services dosprotect protects against Denial of Service attacks dot1ag IEEE 802.1ag; Connectivity Fault Management eaps Ethernet Automatic Protection Switching edp Extreme Discovery Protocol elrp Extreme Loop Recovery Protocol elsm Extreme Link State Monitor ems Event Management System server application epm Extreme Process Manager esrp Extreme Standby Routing Protocol ethoam Ethernet OAM etmon Traffic monitoring and sampling utility exacl Access Control List Module exdhcpsnoop DHCP snooping module exdos Detection of potential Denial of Service attacks module exfib Routing interface to manage missing routes in ASIC exosipv6 IPv6 Custom Interface Module exosmc Multicast Forwarding Module exosnvram Interface to non-volatile RAM exosq EXOS Queue Module exsflow Sflow interface to gather sflow samples exsnoop IGMP/MLD Snooping Module exvlan Layer 2 configuration module fdb Forwarding Data Base Manager hal Hardware Abstraction Layer hclag Health Check LAG idMgr Identity Manager ipSecurity IP Security ipfix IPFIX Traffic monitoring utility isis Intermediate System to Intermediate System Route Protocol lacp Link Aggregation Control Protocol lldp 802.1AB; Station and Media Access Control Connectivity Discover mcmgr Multicast Cache Manager mpls Multi-Protocol Label Switching msdp Multicast Source Discovery Protocol msgsrv Message Server netLogin Network Login includes MAC, Web-Based and 802.1X authentication netTools Network Tools set includes ping/tracert/bootprelay/dhcp/dns/sn nettx Layer 2 forwarding engine module nodemgr Fault Tolerance Manager ospf Open Shortest Path First Routing Protocol ospfv3 Open Shortest Path First Routing Protocol for IPv6 pim Protocol Independent Multicast poe Power Over Ethernet Manager polMgr Policy Manager rip Routing Information Protocol ripng Routing Information Protocol for IPv6 rtmgr Route Table Manager snmpMaster Simple Network Management Protocol - Master agent snmpSubagent Simple Network Management Protocol - Subagent stp Spanning Tree Protocol synce Synchronous Ethernet telnetd Telnet server tftpd Tftp server thttpd Web Server upm Universal Port Manager vlan VLAN Manager - L2 Switching application vmt Virtual Machine Tracking vrrp Virtual Router Redundancy Protocol (RFC 3768) vsm Virtual Switch Manager xmlc XML Client Manager xmld XML server
The following example shows the truncated output for the command on a stack:
Slot-1 stacK.7 # show process Card Process Name Version Restart State Start Time ------------------------------------------------------------------------------ Slot-1 aaa 3.0.0.3 0 Ready Thu Mar 1 11:29:34 2007 Slot-1 acl 3.0.0.2 0 Ready Thu Mar 1 11:29:39 2007 Slot-1 bgp Not Started 0 No license Not Started Slot-1 brm 1.0.0.0 0 Ready Thu Mar 1 11:29:42 2007 Slot-1 cfgmgr 3.0.0.21 0 Ready Thu Mar 1 11:29:34 2007 Slot-1 cli 3.0.0.22 0 Ready Thu Mar 1 11:29:34 2007 Slot-1 devmgr 3.0.0.2 0 Ready Thu Mar 1 11:29:34 2007 Slot-1 dirser 3.0.0.2 0 Ready Thu Mar 1 11:29:33 2007 Slot-1 dosprotect 3.0.0.1 0 Ready Thu Mar 1 11:29:41 2007 Slot-1 eaps 3.0.0.8 0 Ready Thu Mar 1 11:29:36 2007 Slot-1 edp 3.0.0.2 0 Ready Thu Mar 1 11:29:36 2007 Slot-1 elrp 3.0.0.1 0 Ready Thu Mar 1 11:29:35 2007 Slot-1 elsm 3.0.0.1 0 Ready Thu Mar 1 11:29:35 2007 Slot-1 ems 3.0.0.2 0 Ready Thu Mar 1 11:29:34 2007 Slot-1 epm 3.0.0.4 0 Ready Thu Mar 1 11:29:30 2007 Slot-1 esrp 3.0.0.4 0 Ready Thu Mar 1 11:29:37 2007 Slot-1 etmon 1.0.0.1 0 Ready Thu Mar 1 11:29:40 2007 ... ... Slot-6 aaa 3.0.0.3 0 Ready Thu Mar 1 11:29:22 2007 Slot-6 acl 3.0.0.2 0 Ready Thu Mar 1 11:29:24 2007 Slot-6 bgp Not Started 0 No license Not Started Slot-6 brm 1.0.0.0 0 Ready Thu Mar 1 11:29:26 2007 Slot-6 cfgmgr 3.0.0.21 0 Ready Thu Mar 1 11:29:21 2007 Slot-6 cli 3.0.0.22 0 Ready Thu Mar 1 11:29:21 2007 Slot-6 devmgr 3.0.0.2 0 Ready Thu Mar 1 11:29:21 2007 Slot-6 dirser 3.0.0.2 0 Ready Thu Mar 1 11:29:20 2007 Slot-6 dosprotect 3.0.0.1 0 Ready Thu Mar 1 11:29:26 2007 Slot-6 eaps 3.0.0.8 0 Ready Thu Mar 1 11:29:23 2007 Slot-6 edp 3.0.0.2 0 Ready Thu Mar 1 11:29:23 2007 Slot-6 elrp 3.0.0.1 0 Ready Thu Mar 1 11:29:22 2007 Slot-6 elsm 3.0.0.1 0 Ready Thu Mar 1 11:29:22 2007 Slot-6 ems 3.0.0.2 0 Ready Thu Mar 1 11:29:21 2007 Slot-6 epm 3.0.0.4 0 Ready Thu Mar 1 11:29:19 2007 Slot-6 esrp 3.0.0.4 0 Ready Thu Mar 1 11:29:23 2007 Slot-6 etmon 1.0.0.1 0 Ready Thu Mar 1 11:29:25 2007 ...
This command was first available in an ExtremeXOS 10.1.
The description keyword was added in ExtremeXOS 11.2.
Added in ExtremeXOS 15.7, the Version field will be overloaded to contain “User” if the process is a user created process.
This command is available on all platforms.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB