configure ports tdm signaling

configure ports port_list tdm signaling [bit-oriented | robbed-bit | none]

Description

Configures the signaling on the specified TDM ports.

`port_list`	Specifies one or more ports or slots and ports.
tdm	Time Division Multiplexing.
signaling	Signaling mode of the TDM ports.
bit-oriented	E1 channel associated signaling mode.
robbed-bit	T1 robbed bit signaling.
none	No signaling (default).

The default is no signaling (none).

Configures the signaling on the specified TDM ports. If an incompatible setting is attempted, an error message is displayed:

Error: TDM port signaling option is incompatible with the configured TDM hierarchy (T1).

Error: TDM port signaling option is incompatible with the configured TDM hierarchy (E1).

Example output not yet available and will be provided in a future release.

This command was first available in ExtremeXOS 15.1.

This command is available on the cell site routers E4G-200 and E4G-400.

Published August 2016prev | next