Configures the seized-code to be transmitted in the 4-bits telephony line signaling coding of the TDM channel (DS0 timeslots), when the channel is connected.
| seized_code |
The seized code value between 0 and 15 to be transmitted in the 4-bits telephony line signaling coding of the TDM channel (default is 15). |
The default seized-code is 15.
Note the following error type:
Error: Seized Code cannot be configured on unframed TDM ports or on framed TDM ports with signaling disabled.config ports 2 tdm seized-code 12
This command was first available in ExtremeXOS 15.1.
This command is available on the cell site routers (E4G-200 and E4G-400).
Print
this page
Email this topic
Feedback
View PDF
Download EPUB