Configures the settings for the flow key(s) for non-IP type data.
| src-mac | Specifies the source MAC address field as part of the flow key. |
| dest-mac | Specifies the destination MAC address field as part of the flow key. |
| ethertype | Specifies the Ethertype field as part of the flow key. |
| vlan-id | Specifies the VLAN ID field as part of the flow key. |
| priority | Specifies the VLAN priority field as part of the flow key. |
| tagged | Specifies the VLAN tagged field as part of the flow key. |
All flow keys.
Use this command to specify which of the designated flow-keys to use. This overrides the default which is all keys. The template sent to the Collector (per the IPFIX standard) contains only the keys used.
Source MAC Address (48).
Destination MAC Address (48).
Ethertype (16).
VLAN ID (12).
VLAN Priority (3).
VLAN Tagged (1).
To unconfigure, use the unconfigure ip-fix flow-key command.
To display the configured flow keys, use the show ip-fix command.
The following command configures non-IP traffic to use the source MAC address and VLAN ID:
configure ip-fix flow-key src-mac vlan-id
This command was first available in ExtremeXOS 12.5.
This command is available on BlackDiamond 8900 G96Tc, G48T-xl, G48X-xl, and 10G8X-xl modules and Summit X460, X460-G2, X480, and E4G400 switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB