configure ports qosprofile

configure ports port_list {qosprofile} qosprofile

Description

Creates a port-based traffic group, which configures one or more ingress ports to use a particular egress QoS profile.

Syntax Description

`port_list`	Specifies a list of ports or slots and ports.
`qosprofile`	Specifies a QoS profile.

Default

All ingress ports have the default qosprofile of QP1.

Usage Guidelines

This command assigns traffic ingressing the specified port to a specified egress QoS profile. Extreme switches support eight egress QoS profiles (QP1 to QP8) for each port. SummitStack does not permit configuration of QP7.

Example

The following command configures port 5 on slot 5 of a modular switch to use QoS profile QP3:

configure ports 5:5 qosprofile QP3

History

This command was first available in ExtremeXOS 11.0.

Platform Availability

This command is available on all platforms.

Published August 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback