show network-clock sync-e ports
Description
Displays information about synchronous Ethernet (SyncE).
Syntax Description
port_list |
Specifies the port(s). |
details |
Show additional details. |
Default
N/A.
Usage Guidelines
Use this command to display the SyncE configuration and port state on one or more ports. The following command will display the SyncE configuration and port state for all ports:
show network-clock sync-e ports
Example
The following command displays SyncE information for ports 1 - 12 on a Summit X460-48x switch:
show network-clock sync-e ports 1-12
Following is sample output:
=================================================================== Port Flags Input Configured Output Source Clock Quality Clock Quality Clock Quality (Port Number) =================================================================== 1 S2 QL-SSU-A 2 S1 QL-PRC 3 S 4 S 5 S 6 S QL-PRC SOURCE-1 (2) 7 S 8 S 9 S 10 S 11 S 12 S =================================================================== Flags : (S) SyncE Supported, (N) SyncE Not Supported, (E) SyncE Enabled, (f) Forced Source Clock, (1) Clock Source 1, (2) Clock Source 2,
The following examples show output from an E4G-200 switch:
E4G-200.1 # show network-clock sync-e ports 1-8 =================================================================== Port Flags Input Configured Output Source Clock Quality Clock Quality Clock Quality (Port Number) =================================================================== 1 SE1 QL-PRC QL-SEC SOURCE-2 (2) 2 SE2f QL-SEC QL-DNU SOURCE-2 (2) 3 SE QL-SEC SOURCE-2 (2) 4 SE QL-SEC SOURCE-2 (2) 5 SE QL-SEC SOURCE-2 (2) 6 SE QL-SEC SOURCE-2 (2) 7 SE QL-SEC SOURCE-2 (2) 8 SE QL-SEC SOURCE-2 (2) =================================================================== Flags : (S) SyncE Supported, (N) SyncE Not Supported, (E) SyncE Enabled, (f) Forced Source Clock, (1) Clock Source 1, (2) Clock Source 2, E4G-200.2 # show network-clock sync-e ports 1-8 detail Port Number : 1 SyncE Configured : SOURCE-1 Type of Input Clock : QL-PRC (Primary Reference Clock) Configured Input Clock : None SyncE Region : E1 (European and Asian clock region) Port Number : 2 SyncE Configured : SOURCE-2 Type of Input Clock : Configured Input Clock : QL-SEC (Synchronous Digital Hierarchy Equipment Clock) SyncE Region : E1 (European and Asian clock region) Port Number : 3 SyncE Output Status : Enabled Type of Output Clock : QL-SEC (Synchronous Digital Hierarchy Equipment Clock) Current Input Source (port) : SOURCE-2 (2) Port Number : 4 SyncE Output Status : Enabled Type of Output Clock : QL-SEC (Synchronous Digital Hierarchy Equipment Clock) Current Input Source (port) : SOURCE-2 (2) Port Number : 5 SyncE Output Status : Enabled Type of Output Clock : QL-SEC (Synchronous Digital Hierarchy Equipment Clock) Current Input Source (port) : SOURCE-2 (2) Port Number : 6 SyncE Output Status : Enabled Type of Output Clock : QL-SEC (Synchronous Digital Hierarchy Equipment Clock) Current Input Source (port) : SOURCE-2 (2) Port Number : 7 SyncE Output Status : Enabled Type of Output Clock : QL-SEC (Synchronous Digital Hierarchy Equipment Clock) Current Input Source (port) : SOURCE-2 (2) Port Number : 8 SyncE Output Status : Enabled Type of Output Clock : QL-SEC (Synchronous Digital Hierarchy Equipment Clock) Current Input Source (port) : SOURCE-2 (2)
History
This command was first available in ExtremeXOS 15.1.
Platform Availability
This command is available on Summit X460-24x and X460-48x switches and on E4G-200 and E4G-400 switches.