Displays statistics output for the Extreme Service Verification tool on the specified VLAN.
vlan | \Specifies the VLAN for the traffic test. |
vlan_name | Specifies a VLAN name. |
N/A.
Use this command to display test output for the Extreme Service Verification tool on the specified VLAN.
The following example displays show output for the Extreme Service Verification tool on vlan1 and vlan3:
VLAN Status Loopback Duration Tx rate Tx Frame Tx Total Rx Total Port (hh:mm:ss) (Mbps) Size Frames Frames ============================================================================ V1 Running 2 00:09:00 50 64 2000 2000 V1 Stopped 4 00:20:00 150 128 3000 3000 V3 Completed 3 00:60:00 250 256 4000 4000 V1234567> Error 7 00:10:00 100 9100 0 0 ============================================================================ > Indicates vlan name string truncated past 8 characters X480-48x(10G4X).1 # show esvt traffic-test detail VLAN Name : V1 Port : 9 IP Address : 2.2.2.2 Status : Running Duration (hh:mm:ss) : 00:10:00 Time Remaining(hh:mm:ss) : 00:09:00 Loopback Port : 2 Tx rate (Kpbs) : 200000 Tx Frame Size (bytes) : 64 Tx Frames : 0 Rx Frames : 0 Frames Lost : 0 VLAN Name : V1 Port : 3 IP Address : 6.6.6.6 Status : Stopped Duration (hh:mm:ss) : 00:20:00 Loopback Port : 4 Tx rate (Kpbs) : 150 Tx Frame Size (bytes) : 128 Tx Frames : 1000 Rx Frames : 1000 Frames Lost : 0 VLAN Name : V3 Port : 5 IP Address : 7.7.7.7 Status : Completed Duration (hh:mm:ss) : 00:10:00 Loopback Port : 3 Tx rate (Kpbs) : 250 Tx Frame Size (bytes) : 256 Tx Frames : 4000 Rx Frames : 4000 Frames Lost : 0 VLAN Name : V12345678901234567890123456789 Port : invalid port IP Address : 8.8.8.8 Status : Error Duration (hh:mm:ss) : 00:02:00 Loopback Port : 7 Tx rate (Kpbs) : 100 Tx Frame Size (bytes) : 9100 Error : Failed to communicate with peer switch
This command was first available in ExtremeXOS 15.3.
This command is available in X460, X460-G2, X480, E4G-200, E4G-400, X670, X670-G2, Stacking, BDX8 and BD8800.