Displays the specified access list counters.
| countername | Specifies the ACL counter to display. |
| port_list | Specifies to display the counters on these ports. |
| vlan_name | Specifies to display the counters on the VLAN. |
| ingress | Specifies to display ingress counters. |
| egress | Specifies to display egress counters (BlackDiamond X8 series switches, BlackDiamond 8000 c-, xl-, and xm-series modules, E4G-200 andn E4G-400 switches, and Summit X460, X480, X670, and X770 series switches only). |
The default direction is ingress.
Use this command to display the ACL counters.
The following example displays all the counters for all ACLs:
show access-list counter
On a BlackDiamond 8000 c-, e-, xl-, or xm-series module, the output of this command is similar to the following:
Policy Name Vlan Name Port Direction Counter Name Packet Count Byte Count ================================================================== don1 * 2:1 ingress source1111 0 source2222 0
This command was first available in ExtremeXOS 10.1.
The egress option was first available in ExtremeXOS 11.3.
This command is available on all platforms.
The egress option is available on BlackDiamond X8 series switches, BlackDiamond 8000 c- xl-, and xm-series modules, E4G-200 and E4G-400 switches, and Summit X460, X480, X670, and X770 series switches only.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB