unconfigure elrp-client

unconfigure elrp-client vlan_name

Description

Disables a pending one-shot or periodic ELRP request for the specified VLAN.

Syntax Description

vlan_name

Specifies a VLAN name.

Default

N/A.

Usage Guidelines

This command disables a pending one-shot or periodic ELRP request for the specified VLAN.

To start one-time, non-periodic ELRP packet transmission on specified ports of a VLAN using a particular count and interval, use one of the following commands:

configure elrp-client one-shot vlan_name ports [ports | all] intervalsec retrycount [log | print | print-and-log]—(This command is backward compatible with Extreme Networks switches running the ExtremeWare software.)
run elrp vlan_name {portsports} {intervalsec} {retrycount}

To configure periodic transmission of ELRP packets, use the configure elrp-client periodic command.

The ELRP client must be enabled globally in order for it to work on any VLANs. Use the enable elrp-client command to globally enable the ELRP client.

The ELRP client can be disabled globally so that none of the ELRP VLAN configurations take effect. Use the disable elrp-client command to globally disable the ELRP client.

Example

The following command disables a pending ELRP request on VLAN elrp1:

unconfigure elrp-client elrp1

History

This command was first available in ExtremeXOS 11.1.

Platform Availability

This command is available on all platforms.

Published August 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback