configure cfm segment frame-loss dot1p

configure cfm segment segment_name frame-loss dot1p dot1p_priority

Description

This command configures the class of service for a particular cfm segment. This value is used to fill the dot1p priority bit in the Ethernet header during transmission.

If the optional keyword frame-loss is not specified, the same value of Dot1p will be used for both DMM and LMM. The optional keyword allows configuring different values for DMM and LMM.

Syntax Description

segment_name

An alpha numeric string identifying the segment name.

dot1p_priority

Priority value that is set in the DMM/DMR. The range is 0 to 7.

Default

N/A.

Usage Guidelines

Use this command to configure the class of service for a particular cfm segment.

Example

configure cfm segment frame-loss dot1p 4

History

This command was first available in ExtremeXOS 12.3.

Platform Availability

This command is available on all platforms.