configure stpd ports auto-edge

configure stpd stpd_name ports auto-edge [on | off] port_list

Description

Enables and disables auto-edge detection.

`stpd_name`	Specifies an STPD name on the switch.
on	Enables auto-edge detection on the specified port.
off	Disables auto-edge detection on the specified port.
`port_list`	Specifies one or more ports or slots and ports.

By default, auto-edge detection is on.

None.

The following example enables auto-edge detection on port 1:10 in STP domain r1:

configure stpd r1 ports auto-edge on 1:10

This command was first available in ExtremeXOS 15.7.1.

This command is available on all platforms.

Published August 2016prev | next