configure cfm domain association ports end-point mepid

configure cfm domain domain-name association association_name ports port_list end-point [up | down] mepid mepid

Description

Allows you to change the MEP ID for a previously configured MEP. Each MEP within a single MA must have a unique MEP ID.

Syntax Description

domain_name

Enter the domain associated with the MA you are configuring.

association_name

IEEE 802.1ag or ITU-T Y.1731 association name.

port_list

Enter the port number you want to change the MEP ID.

up

Enter this variable if you are changing the MEP ID on an UP MEP.

down

Enter this variable if you are changing the MEP ID on a DOWN MEP.

mepid

Enter the new value for this MEP. The range is 1 to 8191.

NOTE: On each MA, each MEPID must be unique.

Default

N/A.

Usage Guidelines

Use this command to change the MEPID on a previously configured UP or DOWN MEP. If you attempt to change the MEPID on a port that is either not an MEP or having wrong MEP type, the system returns an error message.

Use the show cfm command to verify your configuration.

Example

The following command changes the MEP ID to 75 on the previously configured port 2:4 UP MEP on the 350 association in the finance domain:

configure cfm domain finance association 350 ports 2:4 end-point up mepid 75

History

This command was first available in ExtremeXOS 11.4.

Platform Availability

This command is available on all platforms.