configure fip snooping fcf-update

configure fip snooping {vlan} vlan_name fcf-update [auto | manual]

Description

This command configures the update mode of the list of FCFs per FIP Snooped VLAN. The default mode is auto.

The list of FCFs to which ENodes establish FCoE virtual links is updated either administratively or dynamically via snooped FIP frames. This command selects the method of updating the list of FCFs per VLAN. When the updating method changes, the following events occur.
  • FDB entries of FCFs' MACs are removed.
  • ACLs checking the FCFs' MACs are removed.

In automatic mode, the list of FCFs is automatically constructed through observation of FCF discovery advertisement packets. An attempt to configure an FCF while in automatic mode is rejected.

In manual mode the list of FCFs is configured by the user. Use the following commands to configure the list of FCFs:

When the fcf-update mode is changed from manual to automatic, all configured FCFs are removed.

Syntax Description

vlan_name Name of a FIP Snooping VLAN where the fcf-update mode is to be configured.
auto Learn the list of FCoE forwarders from snooped FIP frames.
manual FCoE forwarders are configured manually using the configure fip snooping add fcf command.

Default

Auto.

Usage Guidelines

This command configures the update mode of the list of FCFs per FIP Snooped VLAN. In automatic mode, the list of FCFs is automatically constructed through observation of FCF discovery advertisement packets. An attempt to configure an FCF while in automatic mode is rejected. In manual mode the list of FCFs is configured by the user. When the fcf-update mode is changed, all FCFs are removed.

Example

configure fip snooping vlan v3 fcf-update manual

History

This command was first available in ExtremeXOS 15.1.

Platform Availability

This command is available on the following platforms:

  • BlackDiamond X8
  • BlackDiamond 8800 series BD8900-40G6X-c
  • Summit X670
  • Summit X770