Displays UDP forwarding profiles.
vlan-name | Specifies a VLAN. |
policy-name | Specifies a UDP forwarding profile. |
If no VLAN or policy is specified, all configured profiles are displayed.
UDP profiles can also be displayed by using the policy manager command show policy {policy-name | detail} . However, the format of the policy display is different than that for this command.
The following example displays all the configured UDP forwarding profiles on the switch:
# show udp-profile UDP Profile Name: move_to7 Number of datagram forwarded: 181 Dest UDP Port: 67 Fwd to IP Addr: 20.0.0.5 Dest UDP Port: 67 Fwd to VLAN: to7 Applied to incoming traffic on VLANS: to-mariner
This command was first available in ExtremeXOS 11.2.
This command is available on all platforms that use the Edge, Advanced Edge, or Core license. For information on the licenses available for each platform, see the Feature License Requirements document.