Disables the secure socket layer (SSL) access to the switch on the default port (443).
This command has no arguments or variables.
Disabled.
Use this command to disable SSL before changing the certificate or private key.
Similar to SSH2, before you can use any SSL commands, you must first download and install the separate Extreme Networks SSH software module (ssh.xmod). This additional module allows you to configure both SSH2 and SSL on the switch. SSL is packaged with the SSH module; therefore, if you do not install the module, you are unable to configure SSL. If you try to execute SSL commands without installing the module first, the switch notifies you to download and install the module. To install the module, see the instructions in Software Upgrade and Boot Options.
The following command disables SSL on the default port:
disable web https
This command was first available in the ExtremeXOS 11.2 and supported with the SSH module.
This command is available on all platforms.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB