configure ports tdm trunk-conditioning

configure tdm service circuit service_name trunk-conditioning trunk_conditioning

Description

Configures the trunk-conditioning value to be transmitted in the TDM channel (DS0 timeslots) during alarm conditions.

`service_name`	TDM service name.
trunk-conditioning	Trunk conditioning signal for the timeslots of a port.
`trunk_conditioning`	Trunk conditioning value between 0 and 255 to be transmitted in the TDM channel during alarm conditions (default is 255, the range is 0-255).

The default trunk-conditioning value is 255.

Note the following error type:

Error: Trunk conditioning cannot be configured on unframed TDM ports.

E4G-200.45 # configure tdm ser circuit test trunk-conditioning 255

This command was first available in ExtremeXOS 15.1.

This command is available on the cell site routers (E4G-200 and E4G-400).

Published August 2016prev | next