Returns the rate-shaping parameters for all QoS profiles on the specified ports to the default values.
| port_list | Specifies the ports on which
to unconfigure QoS profiles. Note: This
parameter is available only on BlackDiamond X8 series switches,
BlackDiamond 8000 series modules, and Summit X460 and X480
series switches, whether or not included in a
SummitStack.
|
| all | Specifies that this command
applies to all ports on the device. Note: This
parameter is available only on BlackDiamond X8 series switches,
BlackDiamond 8000 series modules, and Summit X460 and X480
series switches, whether or not included in a
SummitStack.
|
Minimum bandwidth—0%
Maximum bandwidth—100%
The default values for egress priority and ingress QoS profiles differ by platform as described in the following sections.
Maximum buffer—100% (as set by the configure qosprofile command)
Maximum buffer override—100% (as set by the configure qosprofile command)
Weight—1
WRED—See the configure qosprofile wred command description.
None.
unconfigure qosprofile
This command was first available in ExtremeXOS 11.0.
This command is available on all platforms.
The egress and ports parameters are available only on the BlackDiamond X8 series switches, BlackDiamond c-, e-, xl-, and xm-series modules, and Summit X460, X480, X670, and X770 series switches, whether or not included in a SummitStack.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB