enable network-clock ptp end-to-end-transparent ports

enable network-clock ptp end-to-end-transparent ports port_list

Description

Enables PTP end-to-end-transparent clock functionality (1-step PHY timestamp) on the specified ports.

port_list

Specifies a port or a group of ports.

N/A.

Use this command to enable 1-step transparent clock on the specified ports.

The following example enables end-to-end transparent clock on the front panel ports 1-3:

enable network-clock ptp end-to-end-transparent ports 1-3

This command was first available in ExtremeXOS 15.1.

This command is available on the cell site routers (E4G-200 and E4G-400).

Published August 2016prev | next