show wredprofile

show wredprofile {ports [port_list | all]}

Description

Displays WRED configuration data for the specified ports or all ports.

Syntax Description

`port_list`	Specifies a list of slots and ports to display. Specify ports in the following formats: 3-5, 2:5, 2:6-2:8.
all	Specifies that this command applies to all ports on the device.

Default

N/A.

Usage Guidelines

If no port or port list is specified, this command displays the default WRED configuration values.

Example

The following example displays the WRED settings for port 2:

* Switch.9 # show wredprofile ports 2
Port: 2
WRED configuration parameters
=========================================================
QoS      Packet         Min     Max     Max        Avg.
Profile  Type    Color  Thresh  Thresh  Drop-Rate  Weight
=========================================================
QP1    TCP     Green    100%    100%       100%     4
QP1    TCP     Red      100%    100%       100%     4
QP1    non-TCP Any      100%    100%       100%     4
QP1    non-TCP Red      100%    100%       100%     4
QP3    TCP     Green     10%     20%       100%     4
QP3    TCP     Red      100%    100%       100%     4
QP3    non-TCP Any      100%    100%       100%     4
QP3    non-TCP Red      100%    100%       100%     4
QP8    TCP     Green    100%    100%       100%     4
QP8    TCP     Red      100%    100%       100%     4
QP8    non-TCP Any      100%    100%       100%     4
QP8    non-TCP Red      100%    100%       100%     4

History

This command was first available in ExtremeXOS 12.7.

Platform Availability

This command is available on BlackDiamond X8 series switches, BlackDiamond 8900 c-, xl-, and xm-series modules, E4G-200 and E4G-400 switches, and Summit X460, X480, X670, and X770 switches.

Published August 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback