Resets the MVRP STP domain.
| mvrp | Multiple VLAN Registration Protocol. |
| stpd | The STP domain the VLAN is to be associated with. All ports of the domain will be advertised when this VLAN is registered. |
s0.
Use this command to reset the STP domain associated with a particular VLAN or all VLANs to default. If a VLAN is specified, the specific VLAN will be associated to the default STP, which is configured using the configure mvrp stpd stpd_name default command. If VLAN is not specified, all VLANs are associated to STP domain s0.
unconfigure mvrp stpd
This command was first available in ExtremeXOS 15.3.
This command is available on all platforms.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB