Disables ARP validation for the specified VLAN and member ports.
| vlan_name | Specifies the name of the VLAN to which this rule applies. |
| all | Specifies all ports. |
| ports | Specifies one or more ports. |
By default, ARP validation is disabled.
Use this command to disable ARP validation.
To display information about ARP validation, use the following command:
show ip-security arp validation {vlan} vlan_nameThe following command disables ARP validation on port 1:1 of the VLAN valid:
disable ip-security arp validation vlan valid ports 1:1
This command was first available in ExtremeXOS 11.6.
This command is available on BlackDiamond X8 series switches, BlackDiamond 8000 series modules, and Summit Family switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB