Configures the clocking source for the specified WAN PHY port.
|
port_list |
Specifies one or more ports or slots and ports. |
|
line |
Specifies the port clocking is recovered from the received bitstream. |
|
internal |
Specifies the port clock is an internal, free-run clock. |
Line.
Each WAN PHY port can be configured for the source it will use for clocking; line clocking uses received clocking and internal clocking uses an internal clock.
XFP ports must be in WAN PHY mode. To configure the mode, use the configure ports port_list mode {lan | wan-phy} command.
The following command configures an LW XENPAK WAN PHY port to use the free-run internal clock:
configure ports 1:3 wan-phy clocking internal
This command was available in ExtremeXOS 11.6.
This command is available on 10G XFP ports on Summit X480 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB