configure erps dynamic-state clear

configure erps ring-name dynamic-state [force-switch | manual-switch | clear] port slot:port

Description

Clear force and manual switch triggers to the ERPS ring/sub-ring.

dynamic-state	Configure force/manual/clear switch on the active ERPS ring.
force-switch	Force switch operation.
manual-switch	Manual switch operation.
clear	Clear.

N/A.

Use this command to clear force and manual switch triggers to the ERPS ring/sub-ring.

The following command clears force and manual switch triggers of an ERPS ring named "ring1":

configure erps ring1 dynamic-state clear

This command was first available in ExtremeXOS 15.1.

This command is available on all platforms supported in 12.6 and forward that are running ExtremeXOS.

Published August 2016prev | next