Selectively disables SNMPv3 default-group or default-user access on the switch.
| default-group | Specifies SNMPv3 default-group. |
| default-user | Specifies SNMPv3 default-user. |
Enabled.
This command is used to disable SNMPv3 default-group or default-user access.
Disabling SNMPv3 default-group access removes access to default-users and user-created users who are part of the default-group. The user-created authenticated SNMPv3 users (who are part of a user-created group) are able to access the switch. By disabling default-users access, the end-user is not able to access the switch/MIBs using SNMPv3 default-user.
The default groups are: admin, initial, v1v2c_ro, v1v2c_rw.
The default users are: admin, initial, initialmd5, initialsha, initialmd5Priv, initialshaPriv.
The following command disables the default group on the switch:
disable snmp default-group
This command was available in ExtremeXOS 12.2.
It was also included in ExtremeXOS 11.6.4 and ExtremeXOS 12.1.2.
This command is available on all platforms.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB