configure vrrp fabric-routingThis command enables fabric routing mode on the VRRP router. This setting can be done on all VRRP routers, but it will not affect the VRRP master router. It will take effect in VRRP Backup router. With respect to VRRP state, backup state will be used for CLI and MIB, so that standard MIB can be used for retrieving the states.
| vlan_name | VLAN name. |
| vr_id | Virtual router ID value. |
| all | Configuration affects all VRRP VRs. |
| on | Enable L3 forwarding capability for a VRRP router in backup state. |
| off | Disable L3 forwarding capability for a VRRP router in backup state (default). |
Off.
None.
This command was first available in ExtremeXOS 16.2.
This command is supported on all platforms.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB