configure ip-fix source ip-address

configure ip-fix source ip-address ipaddress {vr vrname}

Description

Configures the source IP address used to communicate to the collector.

Syntax Description

ipaddress Specifies the source IP address to be used in IPFIX packets.
vrname Specifies a virtual router name.

Default

Switch IP address of the interface the traffic egresses.

Usage Guidelines

Use this command to specify the source IP address and VR to use when sending from the switch to a given collector. Otherwise, the default is used.

There is one collector.

To reset to the default of the switch IP address, use the unconfigure ip-fix ip-address command.

Example

The following command configures an IP address of 1.1.1.1 and VR of finance:

configure ip-fix source ip-address 1.1.1.1 finance

History

This command was first available in ExtremeXOS 12.5.

Platform Availability

This command is available on BlackDiamond 8900 G96Tc, G48T-xl, G48X-xl, and 10G8X-xl modules and Summit X460, X460-G2, X480, and E4G400 switches.