run erps force-switch | manual-switch

run erps ring-name [force-switch | manual-switch] {port} port

Description

Set up force and manual switch triggers to the ERPS ring/sub-ring.

`ring-name`	Alphanumeric string that identifies the ERPS ring.
force-switch	Force switch operation.
manual-switch	Manual switch operation.
`port`	The slot:port number for the ring port.

N/A.

Use this command to set up force and manual switch triggers to the ERPS ring/sub-ring.

The following command sets up force switch operation on port 6 of an ERPS ring named “ring1”:

run erps ring1 force-switch port 6

This command was first available in ExtremeXOS 15.1.

This command is available on all platforms supported in 12.6 and forward that are running ExtremeXOS.

Published August 2016prev | next