enable snmp notification-log

enable snmp notification-log [ default | name | hex hex_name |all]

Description

Controls the administrative state of a log.

default	The default log.
`name`	Specifies the name of the log.
hex	Provide value in hexadecimal.
`hex_name`	Name of the log in hexadecimal.
all	Specifies all logs.

Disabled.

Use this command to control the administrative state of a log.

The following example enables all logs:

enable snmp notification-log all

The following example enables nmslog2:

enable snmp notification-log nmslog2

This command was first available in ExtremeXOS 15.5.

The default and hex keywords and hex_name variable were added in ExtremeXOS 15.6.

This command is available on all platforms.

Published August 2016prev | next