Use this command to set the NetLogin trap setting for system, module, and ports.
all | Configure all ports in the system. |
port_list | List of ports to configure. |
allowed-users | Number of users allowed per port. |
allowed_users | Number of users allowed per port. Range 0-65535. |
authentication | Configure port authentication settings. |
mode | Port authentication mode. |
optional | Authentication optional. |
required | Authentication required. |
all-traps | Enable sending all trap types. |
no-traps | Disable sending all trap types. |
success | Enable sending success trap. |
failes | Enable sending failed trap. |
terminated | Enable sending terminated trap. |
max-reached | Enable sending max number users reached trap |
Optional.
None.
This example shows how to enable all NetLogin port trap setting:
configure netlogin trap port 1:1 all
This command was first available in ExtremeXOS 16.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, and X770.