Note
MLD snooping is not supported in this software release.Displays MLD snooping registration information and a summary of all MLD timers and states.
| name | Specifies a VLAN name. |
| detail | Displays the information in detailed format. |
| MLDv2 | Displays the MLD group in MLDv2 format (if group record is MLDv2 compatible, otherwise displays in earlier format). This option is not supported in this release. |
MLDv1.
The two types of MLD snooping entries are sender entry and subscribed entry.
Here is an example of the show output:
# show mld snooping MLD Snooping Flood-list : none MLD Snooping Proxy : Enable MLD Snooping Filters : per-port Vlan Vid Port #Senders #Receivers Router Enable -------------------------------------------------------------- Default 1 0 Yes v1 4084 0 Yes 25 1 Yes 41 2 No 42 2 No
The following command displays MLD snooping registration information for the VLAN V1:
# show mld snooping v1 Router Timeout : 260 sec Host Timeout : 260 sec MLD Snooping Fast Leave Time : 1000 ms VLAN v1 (4084) Snooping=Enabled Port Host Age Subscribed Join Limit 25 fe80::204:96ff:fe3a:ce50 13 ff02::1:ff3a:ce50 No Limit 25 fe80::204:96ff:fe3a:ce50 14 All Groups No Limit 41 fe80::200:8ff:fe55:5c27 13 ff02::1:ff00:2 No Limit 41 fe80::200:8ff:fe55:5c27 13 ff02::1:ff55:5c27 No Limit 42 fe80::200:8ff:fe56:5c2b 14 ff02::1:ff00:2 No Limit 42 fe80::200:8ff:fe56:5c2b 13 ff02::1:ff56:5c2b No Limit s = static MLD member * X480-48t.27 #
This command was first available in ExtremeXOS 11.2.
This command is available on the platforms listed for the IPv6 multicast routing feature in the Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB