configure ospf metric-table

configure ospf metric-table 10M cost_10m 100M cost_100m 1G cost_1g {10G cost_10g} {40G cost_40g} {100G cost_100g}

Description

Configures the automatic interface costs for 10 Mbps, 100 Mbps, and 1 Gbps interfaces, and optionally, the 10 Gbps, 40 Gbps, and 100Gbps interfaces.

Syntax Description

cost Specifies the interface cost for the indicated interfaces.

Default

  • 10 Mbps—The default cost is 10.
  • 100 Mbps—The default cost is 5.
  • 1 Gbps—The default cost is 4.
  • 10 Gbps—The default cost is 2.
  • 40 Gbps—The default cost is 2.
  • 100 Gbps—The default cost is 1.

Usage Guidelines

Not applicable.

Example

The following command configures the automatic interface costs for 10 Mbps, 100 Mbps, and 1 Gbps interfaces:

configure ospf metric-table 10m 20 100m 10 1g 2

History

This command was first available in ExtremeXOS 10.1.

The 40 Gbps parameter was added in ExtremeXOS 12.6.

Platform Availability

This command is available on platforms with an Advanced Edge or Core license as described in the Feature License Requirements document.