configure mld snooping vlan ports delete static group

configure mld snooping {vlan} vlan_name ports port_list delete static group [all | v6grpipaddress]


Removes the configuration that causes VLAN ports to receive the traffic from a multicast group, even if no MLD joins have been received on the port.

Syntax Description

vlan_name Specifies a VLAN name.
port_list Specifies one or more ports or slots and ports. On a modular switch, it can be a list of slots and ports. On a standalone switch, it can be one or more port numbers. In the form 1, 2, 3-5, 2:5, 2:6-2:8.
all Specifies all multicast groups.
v6grpipaddress Specifies the multicast group IPv6 address.



Usage Guidelines

Use this command to delete a static group from a particular VLAN port.

To add a static group, use the following command:

configure mld snooping {vlan} vlan_name portsport_list add static groupv6grpipaddress


The following example removes a static MLD entry so the multicast group ff02::a:b is not forwarded to VLAN marketing on ports 2:1-2:4, unless an MLD join message is received on the port:

configure mld snooping marketing ports 2:1-2:4 delete static group ff02::a:b


This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on the platforms listed for the IPv6 multicast routing feature in the Feature License Requirements document.