enable inline-power ports

enable inline-power ports [all | port_list]

Description

Enables PoE power currently provided to all ports or to specified ports.

Syntax Description

all Enables inline power to all ports on the switch.
port_list Enables inline power to the specified ports.

Default

Enable.

Usage Guidelines

Disabling inline power to a port immediately removes power to any connected PD. By default, inline power provided to all ports is enabled.

On modular switches, to deliver inline power to ports with connected PDs, you must also reserve power for the slot with the PDs using the configure inline-power budget command. If you do not have enough reserved power for the port, that port moves into a Denied state.

Note

Note

On modular switches, if your chassis has an inline power module and there is not enough power to supply a slot, that slot will not be powered on; the slot will not function in data-only mode without enough power for inline power.

Disabling inline power using the disable inline-power command does not affect the data traffic traversing the port. And, disabling the port using the disable port command does not affect the inline power supplied to the port.

Example

The following command enables inline power to ports 4 and 5 on slot 3 on a modular switch:

enable inline-power ports 3:4-5

History

This command was first available in ExtremeXOS 11.1.

Platform Availability

This command is available on the PoE devices listed in Extreme Networks PoE Devices.