Configures the line coding scheme used on the specified time division multiplexing (TDM) ports.
|
port_list |
Specifies a port or group of ports. |
|
tdm |
Time Division Multiplexing. |
|
line-coding |
Zero code suppression variety of TDM ports. |
|
b8zs |
T1 B8ZS line coding (default for T1). |
|
hdb3 |
E1 HDB3 line coding (default for E1). |
|
ami |
E1 AMI line coding. |
The default selection for T1 is B8ZS, and the default selection for E1 is HDB3.
If the line coding options configured are not compatible with the chosen TDM hierarchy, the following error message will be printed and the configuration will be rejected:
Error: TDM port line coding configuration is incompatible with the configured TDM hierarchy (T1).or
Error: TDM port line coding configuration is incompatible with the configured TDM hierarchy (E1).E4G400#configure port 35 tdm line-coding HDB3
This command was first available in ExtremeXOS 15.1.
This command is available on the cell site routers (E4G-200 and E4G-400).
Print
this page
Email this topic
Feedback
View PDF
Download EPUB