show security fips-mode

Description

Use this command to show the configured FIPS-mode.

Syntax Description

This command has no arguments or variables.

Default

N/A

Example

show security fips-mode
FIPS Mode: Off
configure security fips-mode on
FIPS mode will be enabled only after rebooting the switch.
SNMPv3 users configured with either md5 authentication or DES encryption will be discarded after reboot.
show security fips-mode
FIPS Mode: On

History

This command was first available in ExtremeXOS 16.2.

Platform Availability

This command is available on all platforms.

Published August 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback