Configures the transmit clock source of the specified TDM port.
|
port_list |
Specifies one or more ports or slots and ports. |
|
line |
TDM line recovered clock (clock slave mode) (Default). |
|
adaptive |
Adaptive clock recovery |
|
differential |
Differential clock recovery. |
|
network |
Network clock. |
|
ces_name |
Alpha-numeric string identifying Circuit Emulation Service pseudowire recovered clock. |
The default clock-source is line.
Currently the hardware limits the CES pseudowire recovered clock (Adaptive/Differential) to be supplied only to the port terminating the pseudo-wire. When the [adaptive | differential] switch is used, the backend EXOS process processing the command will return the following error message if the port_list parameter expands to multiple ports:
Error: The CES pseudo-wire <ces_name> cannot be used to supply clock to multiple ports.The backend EXOS process processing the command will return the following error message if the port specified in the port_list parameter does not terminate the CES pseudo-wire when the [adaptive | differential] switch is used:
Error: CES pseudo-wire <ces_name> does not terminate on port specified for using Adaptive or Differential clock recovery.E4G-400#configure port 40 tdm clock-source network
This command was first available in ExtremeXOS 15.1.
This command is available on the cell site routers E4G-200 and E4G-400.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB