New topicconfigure ospfv3 restart

configure ospfv3 restart [none | planned | unplanned | both]

Description

This command configures the graceful restart behavior the router.

Syntax Description

none Disable graceful restart.
planned Support planned restart only.
unplanned Support unplanned restart only.
both Support both planned and unplanned restarts.

Default

Graceful restart is disabled by default.

Usage Guidelines

When configured for planned restarts, it will support planned restarts (like process restart) and advertise Grace LSAs before restarting. When configured for unplanned restarts, it will support unplanned restarts (like MM failover in a chassis) and advertise Grace LSAs after restarting but before sending any Hellos. When configured for both, the router will support both planned and unplanned restarts. Unplanned restarts and BFD configuration on interfaces are incompatible in EXOS. If both are enabled, an unplanned restart will fail.

History

This command was first available in ExtremeXOS 16.2.

Platform Availability

This command is available on all platforms.