enable iproute ipv6 sharing

enable iproute ipv6 sharing {{vr} vr_name} | {{vr} all}}

Description

This command enables IPv6 route sharing.

Syntax Description

vr_name Specifies a VR or VRF. If no VR name is specified, the current CLI context is used.
all Specifies all VR or VRF.

Default

Disabled.

Usage Guidelines

This command enables IPv6 route sharing for the IPv6 address family and VR.

Example

The following example enables IPv6 route sharing for the IPv6 address family and the VR of the current CLI context.

enable iproute ipv6 sharing

History

This command was first available in ExtremeXOS 15.3.

Platform Availability

This command is available on the platforms listed for the IPv6 unicast routing feature in the Feature License Requirements document.

The ability to enable and disable ECMP for IPv6 is now supported for all Summit and BlackDiamond, except for the Summit X440 If present in a SummitStack, any Summit X440 nodes ingressing IPv6 unicast packets will still perform unipath IPv6 forwarding in hardware.