show isis counters

show isis counters {area [area_name | all] | vlan [vlan_name | all]}

Description

This command displays counters for an area or a VLAN.

Syntax Description

area_name Specifies a router process for which to display the IS-IS counters. If you do not specify an IS-IS area, the software displays counters for all areas.
vlan_name Specifies a VLAN for which to display IS-IS counters.
all Displays IS-IS counters for all areas or VLANs.

Default

None.

Usage Guidelines

If you enter the show isis counters command without any additional keywords or parameters, the software displays the counters for all areas.

Example

The following command displays the IS-IS counters for the configured area:

show isis counters

The following command displays the IS-IS counters for the SJvlan VLAN:

show isis counters vlan SJvlan

History

This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available on platforms with a Core license.