configure policy maptable

configure policy maptable [response [tunnel | policy | both] | vlan_list profile_index]


Use this command to add entries to the mapping table and to set the map table response state for the switch.

Syntax Description

vlan_list VLAN ID or range of IDs (1-4094)
profile_index Policy ID [ 0 | 1..1023].



Usage Guidelines

The policy response is the default response for the configure policy maptable command.


This example adds an entry to the map table that maps VLAN 3 to policy profile 8:

configure policy maptable 3 8


This command was first available in ExtremeXOS 16.1.

Platform Availability

This command is available on all platforms.