Lets you create your own label for a specified PoE port or group of PoE ports.
| string | Specifies a name up to 15 characters in length to identify the specified power port(s). |
| port_list | Specifies one or more ports or slots and ports. |
No label.
Use the show inline-power configuration ports command, as shown in the following example, to display inline power configuration information, including the label (if any) for each port:
show inline-power configuration port 3:1-10
Following is sample output from this command on a modular switch:
Port Config Operator Limit Priority Label 3:1 Enabled 16000 mW Low finance 3:2 Enabled 15000 mW Low finance 3:3 Enabled 15000 mW Low 3:4 Enabled 15000 mW Low 3:5 Enabled 15000 mW Low 3:6 Enabled 15000 mW Low marketing 3:7 Enabled 15000 mW Low marketing 3:8 Enabled 15000 mW Low marketing 3:9 Enabled 15000 mW Low 3:10 Enabled 15000 mW Low
The following command assigns the name “alpha-test_1” to port 1 on slot 4:
config inline-power label alpha-test_1 ports 4:1
This command was first available in ExtremeXOS 11.1.
This command is available on the PoE devices listed in Extreme Networks PoE Devices.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB