configure netlogin redirect-page

configure netlogin redirect-page url


Configures the redirect URL for Network Login.

Syntax Description

url Specifies the redirect URL for Network Login.


The redirect URL default value is; the default port value is 80.

Usage Guidelines

In ISP mode, you can configure network login to be redirected to a base page after successful login using this command. If a RADIUS server is used for authentication, then base page redirection configured on the RADIUS server takes priority over this configuration.

You must configure a complete URL starting with http:// or https://.

You can also configure a specific port location at a specific target URL location. For example, you can configure a target port 8080 at with the following command:

configure netlogin redirect-page ""

To support https, you must first download and install the separate Extreme Networks SSH software module (ssh.xmod). This additional module allows you to configure both SSH2 and SSL on the switch. For more information about SSH2, see Security in the ExtremeXOS 16.2 User Guide. For information about installing the SSH module, see Software Upgrade and Boot Options.

This command applies only to the web-based authentication mode of Network Login.


The following command configures the redirect URL as

configure netlogin redirect-page


This command was first available in ExtremeXOS 11.1.

Support for HTTPS was introduced in ExtremeXOS 11.2.

Target port support was introduced in ExtremeXOS 12.1.

Platform Availability

This command is available on all platforms.