Disables gPTP on one or more ports.
| port_list | Specifies one or more the the switch's physical ports. |
| all | Specifies all of the switch's physical ports. |
Disabled.
Use this command to configure on which ports gPTP runs. gPTP runs on no ports if it is not enabled in the switch by enable network-clock gptp.
disable network-clock gptp ports 1-3
This command was first available in ExtremeXOS 15.3.
This command is available on Summit X430, X440, X450-G2, X460, X460-G2, X670, X670-G2, and X770.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB