enable network-clock ptp end-to-end transparent

[enable] network-clock ptp end-to-end-transparent ports port_list

Description

Enable PTP end-to-end-transparent clock functionality (1-step PHY timestamp) on the ports.

port_list

List of physical ports.

N/A.

See Description.

The following example enables end-to-end transparent clock on the front panel ports 1-3:

enable network-clock ptp end-to-end-transparent ports 1-3

This command was first available in ExtremeXOS 15.1.

This command is available on the cell site routers (E4G-200 and E4G-400) and Summit X770.

Note

PTP commands can be used only with the Network Timing feature pack.

Published August 2016prev | next