configure lldp ports system-name

configure lldp ports [all | port_list] [advertise | no-advertise] system-name

Default

Configures the LLDP port to advertise or not to advertise its system name to its neighbors.

all	Specifies all ports on the switch.
`port_list`	Specifies one or more ports or slots and ports.
advertise	Specifies to send the information to neighbors.
no-advertise	Specifies not to send the information to neighbors.

No advertise.

N/A.

The following command configures port 1:6 to advertise the system name to neighbors:

configure lldp ports 1:4 - 1:8 advertise system-name

This command was first available in ExtremeXOS 11.2.

This command is available on all platforms.

Published August 2016prev | next