configure snmp compatibility ip-fragmentation

configure snmp compatibility ip-fragmentation [allow | disallow]

Description

Enables or disables allowing IP fragmentation for the SNMP PDUs.

Syntax Description

compatibility	Compatibility options.
ip-fragmentation	Compatibility option relate to the IP fragmentation for SNMP PDUs.
allow	All fragmentation of outgoing SNMP PDUs.
disallow	Set Do not Fragment (DF) bit in outgoing SNMP PDUs.

Default

Disallow.

Usage Guidelines

Use this command to enable or disable allowing IP fragmentation for the SNMP PDUs.

Example

The following example shows output of the show management command:

Switch # show management 
CLI idle timeout                 : Enabled (20 minutes)
CLI max number of login attempts : 3
CLI max number of sessions       : 8
CLI paging                       : Enabled (this session only)
CLI space-completion             : Disabled (this session only)
:
:
:
SNMP access                      : Enabled
                                 : Access Profile : not set
SNMP Compatibility Options       :    
    IP Fragmentation             : Allow
SNMP  Traps                      : Enabled
:
:

History

This command was first available in ExtremeXOS 15.5.

Platform Availability

This command is available on all platforms.

Published August 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback