Displays FDB entry statistics for the specified ports or VLANs in either a dynamic or a static report.
| all | Requests statistics for all ports or all VLANs. |
| port_list | Specifies which ports are to be included in the statistics display. |
| vlan_name | Specifies a single VLAN to be included in the statistics display. |
| vlan_list | Specifies a VLAN list of IDs to be included in the statistics display. |
| refresh | Specifies a continuous refresh of output. |
Summary FDB statistics for the switch.
The dynamic display remains visible and continues to update until you press [Esc].
The show fdb stats command output displays the following information:
| Port | When you chose to display statistics for ports, this column displays port numbers. |
| Link State | When you chose to display statistics for ports, this column displays the link states, which are described at the bottom of the display. |
| VLAN | When you chose to display statistics for VLANs, this column displays VLAN names. |
| MAC Addresses | This column displays the total number of MAC addresses for each port or VLAN. |
| Dynamic | This column displays the total number of MAC addresses that were learned dynamically for each port or VLAN. |
| Static | This column displays the total number of MAC addresses that are configured on this switch for each port or VLAN. |
| Dropped | This column displays the total number of dynamic MAC addresses that were discovered, but not stored in the FDB. Discovered MAC addresses might be dropped because a configured learning limit is reached, the FDB is in lockdown, or a port forwarding state is in transition. Some conditions that lead to dropped MAC addresses can produce log messages or SNMP traps. |
The following command example displays summary FDB statistics for the switch:
torino1.1 # show fdb stats Total: 4 Static: 3 Perm: 3 Dyn: 1 Dropped: 0 FDB Aging time: 300 FDB VPLS Aging time: 300 torino1.2 #
The following command example displays FDB statistics for ports 1 to 16 on slot 1:
# show fdb stats ports 1:1-1:16 FDB Stats Mon Mar 15 15:30:49 2010 Port Link MAC State Addresses Dynamic Static Dropped ======================================================================= 1:1 A 2394 2389 5 2 1:2 A 37 37 0 0 1:3 A 122 121 1 452 1:4 R 0 0 0 0 1:5 R 0 0 0 0 1:6 A 43 43 0 0 1:7 A 118 118 0 0 1:8 R 0 0 0 0 1:9 R 0 0 0 0 1:10 A 8 8 0 0 1:11 A 2998 2990 8 1 1:12 A 486 486 0 0 1:13 R 0 0 0 0 1:14 A 42 42 0 0 1:15 A 795 795 0 0 1:16 A 23 23 0 2 ======================================================================= Link State: A-Active, R-Ready, NP-Port Not Present, L-Loopback U->page up D->page down ESC->exit
The following command example displays FDB statistics for all VLANs:
# show fdb stats vlan all FDB Stats Mon Mar 15 15:30:49 2010 VLAN MAC Addresses Dynamic Static Dropped ============================================================================= SV_PPPOE 2394 2389 5 2 NV_PPPOE 122 121 1 452 ============================================================================= U->page up D->page down ESC->exit
The dynamic display for this command was first available in ExtremeXOS 12.4.2.
The no-refresh keyword was removed in ExtremeXOS 16.1.
The vlan_list variable was added in ExtremeXOS 16.1.
The refresh keyword was added in ExtremeXOS 16.1.
This command is available on all platforms.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB