show log configuration target xml-notification

show log configuration target xml-notification {xml_target_name}

Description

Displays XML target information.

Syntax Description

xml_target_name

Specifies the configured xml notification target.

Default

N/A.

Usage Guidelines

Use this command to display XML target information.

Example

The following command displays XML target information for all targets:

show log configuration target xml-notification

Following is sample output from the command:

Log Target      : xml-notification (sqa)
Enabled     : yes
Filter Name : DefaultFilter
Match regex : Any
Severity    : Info (through Critical)
Log Target      : xml-notification (epi)
Enabled     : yes
Filter Name : xmlc_filter_epi
Match regex : Any
Severity    : Info (through Critical)

In the case that the alert is not configured:

X670V-48t.1 # sh log configuration
Debug-Mode: Disabled 

Log Target       : memory-buffer    
    Enabled      : yes    
    Filter Name  : DefaultFilter    
    Match regex  : Any    
    Severity     : Debug-Data (through Critical)    
    Format       : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition>
    Buffer size  : 1000 messages
    Percent Full : 60%
    Full Alert   : None 

Log Target       : nvram
    Enabled      : yes
    Filter Name  : DefaultFilter
    Match regex  : Any
    Severity     : Warning (through Critical)
    Format       : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition> 

Log Target       : console
    Enabled      : no 
    Filter Name  : DefaultFilter
    Match regex  : Any
    Severity     : Info (through Critical)
    Format       : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition>

In the case that the alert is configured and the percentage threshold is set to 90:

X670V-48t.1 # sh log configuration
Debug-Mode: Disabled 

Log Target       : memory-buffer
    Enabled      : yes
    Filter Name  : DefaultFilter
    Match regex  : Any
    Severity     : Debug-Data (through Critical)
    Format       : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition>
    Buffer size  : 1000 messages    
    Percent Full : 60%
    Full Alert   : 90% 

Log Target       : nvram
    Enabled      : yes
    Filter Name  : DefaultFilter
    Match regex  : Any
    Severity     : Warning (through Critical)
    Format       : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition> 

Log Target       : console
    Enabled      : no 
    Filter Name  : DefaultFilter
    Match regex  : Any
    Severity     : Info (through Critical)
    Format       : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition>

In the case that the buffer is currently wrapping and the percentage threshold is set to 90:

X670V-48t.1 # sh log configuration
Debug-Mode: Disabled 

Log Target       : memory-buffer
    Enabled      : yes
    Filter Name  : DefaultFilter
    Match regex  : Any
    Severity     : Debug-Data (through Critical)
    Format       : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition>
    Buffer size  : 1000 messages
    Percent Full : 100% (wrapping)
    Full Alert   : 90% 

Log Target       : nvram
    Enabled      : yes
    Filter Name  : DefaultFilter
    Match regex  : Any
    Severity     : Warning (through Critical)
    Format       : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition> 

Log Target       : console
    Enabled      : no 
    Filter Name  : DefaultFilter
    Match regex  : Any
    Severity     : Info (through Critical)
    Format       : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition>

History

This command was first available in ExtremeXOS 12.4.

Platform Availability

This command is available on BlackDiamond X8, BlackDiamond 8000 series modules, and Summit Family switches.

Published August 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback