enable ports tdm loopback

enable ports port_list tdm loopback [local | network [line | payload]]

Description

Enables the local or network loopback mode used on the specified time division multiplexing (TDM) ports.

`port_list`	Specifies a port or group of ports.
tdm	Time Division Multiplexing.
loopback	Loopback mode.
local	Local loopback.
network	Network loopback (transmit received data).
line	Loopback framing and data received from the far end.
payload	Loopback data received from the far end.

The loopback is disabled by default.

Use this command to enable local or network loopback mode on the specified TDM ports.

Example output not yet available and will be provided in a future release.

This command was first available in ExtremeXOS 15.1.

This command is available on the cell site routers (E4G-200 and E4G-400).

Published August 2016prev | next